<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>ug - UG11.0教程</title>
    <link>https://9sug.com/forum-170-1.html</link>
    <description>Latest 20 threads of UG11.0教程</description>
    <copyright>Copyright(C) ug</copyright>
    <generator>Discuz! Board by Discuz! Team</generator>
    <lastBuildDate>Mon, 06 Apr 2026 09:39:35 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://9sug.com/static/image/common/logo_88_31.gif</url>
      <title>ug</title>
      <link>https://9sug.com/</link>
    </image>
    <item>
      <title>UG11.0强制方向扫掠求差后槽不等宽就上UG网</title>
      <link>https://9sug.com/thread-44896-1-1.html</link>
      <description><![CDATA[UG11.0强制方向扫掠求差后槽不等宽就上UG网

用的 强制方向，跟圆柱体求差后槽的上下口不等宽]]></description>
      <category>UG11.0教程</category>
      <author>保护地球</author>
      <pubDate>Sun, 24 Jun 2018 02:45:32 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0坐标摆正了但显示不正调整技巧就上UG网</title>
      <link>https://9sug.com/thread-44868-1-1.html</link>
      <description><![CDATA[UG11.0坐标摆正了但显示不正调整技巧就上UG网

如图显示，坐标摆正了，但显示不直，这个是单纯的显示问题，哪位大神知道怎么调整！多谢！]]></description>
      <category>UG11.0教程</category>
      <author>NX高手</author>
      <pubDate>Sun, 17 Jun 2018 02:45:10 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0怎么恢复原始模板不想使用加载的模板</title>
      <link>https://9sug.com/thread-44760-1-1.html</link>
      <description><![CDATA[UG11.0怎么恢复原始模板不想使用加载的模板就上UG网

UG11.0软件可以设置很多的模板，一下小心加载了朋友发来的模板，如何再还原到之前的模板呢]]></description>
      <category>UG11.0教程</category>
      <author>UG6.0</author>
      <pubDate>Sat, 26 May 2018 01:40:07 +0000</pubDate>
    </item>
    <item>
      <title>UG11突然无法导出igs stp dwg就上UG网</title>
      <link>https://9sug.com/thread-40550-1-1.html</link>
      <description><![CDATA[ug11.0突然无法导出任何格式，包括igs stp 和dwg等，之前是因为显卡驱动问题。

这次我从2017.10月的显卡驱动一个个更新下来都没用。

是不是因为显卡驱动太新呢？？？]]></description>
      <category>UG11.0教程</category>
      <author>学NX</author>
      <pubDate>Fri, 30 Mar 2018 23:54:18 +0000</pubDate>
    </item>
    <item>
      <title>UG10.0拉伸面时提示面没有形成全相交,且公共边无法适应</title>
      <link>https://9sug.com/thread-40389-1-1.html</link>
      <description><![CDATA[UG10.0拉出面时提示：面没有形成全相交,且公共边无法适应。是什么原因]]></description>
      <category>UG11.0教程</category>
      <author>登录</author>
      <pubDate>Mon, 26 Mar 2018 23:12:59 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程113网络大赛3D05_H03_B中磊教育</title>
      <link>https://9sug.com/thread-39121-1-1.html</link>
      <description><![CDATA[UG11.0教程113网络大赛3D05_H03_B中磊教育

题目简介：
题目：参照图构建三维模型，注意其中的同心、对称等几何关系。
参数： A=22， B=36， C=7， D=52， E=32， F=15， G=25

在线视频：

免费下载：
UG11.0教程113网络大赛3D05_H03_B中磊教育

 提取密码：**** 本内 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Fri, 19 Jan 2018 01:12:44 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程112网络大赛3D05_H03_A中磊教育</title>
      <link>https://9sug.com/thread-39120-1-1.html</link>
      <description><![CDATA[UG11.0教程112网络大赛3D05_H03_A中磊教育

题目简介：
题目：参照图构建立体模型，注意其中的等壁厚、等距（尺寸 B 处）等几何关系。
参数： A=108， B=10， C=132， D=32， E=232， F=180， T=5
在线学习：

免费下载：
UG11.0教程112网络大赛3D05_H03_A中磊教育

提 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Fri, 19 Jan 2018 01:08:15 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程111网络大赛3D05_L03_B中磊教育</title>
      <link>https://9sug.com/thread-39119-1-1.html</link>
      <description><![CDATA[UG11.0教程111网络大赛3D05_L03_B中磊教育

题目简介：
题目：参照图绘制零件模型，注意其中的相切、同心、对称等几何关系。
参数： A=80， B=5， C=25， D=86， E=110， T=2

在线学习：

免费下载：
UG11.0教程111网络大赛3D05_L03_B中磊教育

提取密码：**** 本内容 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Fri, 19 Jan 2018 00:47:01 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程110凸模板中磊教育</title>
      <link>https://9sug.com/thread-39118-1-1.html</link>
      <description><![CDATA[UG11.0教程110凸模板中磊教育学习本节UG11.0凸板设计实例教程需要20分钟，讲解的是关于凸板模型的画法；

在线学习：

免费下载：
UG11.0教程110凸模板中磊教育

 提取密码：**** 本内容被作者隐藏 ****
 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Fri, 19 Jan 2018 00:41:46 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程109底板三维设计中磊教育</title>
      <link>https://9sug.com/thread-39114-1-1.html</link>
      <description><![CDATA[UG11.0教程109底板三维设计中磊教育，底板三维设计运用了UG11.0软件下的拉伸、孔、布尔运算等功能，通过本例子的学习，可以掌握关于看图、识图、画图的技巧。

在线学习：

免费下载：
UG11.0教程109底板三维设计中磊教育

 提到密码：**** 本内容被作者隐藏 ****
 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Thu, 18 Jan 2018 01:54:22 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程108参数化建模3D05_L03A中磊教育</title>
      <link>https://9sug.com/thread-39113-1-1.html</link>
      <description><![CDATA[UG11.0教程108参数化建模3D05_L03A中磊教育

题目简介：
题目：参照图构建零件模型，其注意其中的对称、相切、同心等几何关系。
参数： A=137， B=115， C=150， D=24， E=60

免费下载：
UG11.0教程108参数化建模3D05_L03A中磊教育

提取密码：**** 本内容被作者隐藏 * ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Thu, 18 Jan 2018 01:47:22 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程107参数化建模3D05_H02B中磊教育</title>
      <link>https://9sug.com/thread-39112-1-1.html</link>
      <description><![CDATA[UG11.0教程107参数化建模3D05_H02B中磊教育

题目简介：
题目：参照图构建立体模型，注意其中的等壁厚、重合等几何关系。
参数：A=30， B=28， C=26， D=23， E=42， F=19， T=1.8

免费下载：
UG11.0教程107参数化建模3D05_H02B中磊教育

提取密码：**** 本内容被作者 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Thu, 18 Jan 2018 01:43:30 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程106参数化建模3D05_H02A中磊教育</title>
      <link>https://9sug.com/thread-39111-1-1.html</link>
      <description><![CDATA[UG11.0教程106参数化建模3D05_H02A中磊教育

题目简介：
题目：参照图构建零件模型，其注意其中的对称、相切、重合等几何关系。模型中除标注厚度为 2 的区域外，厚度均为 T。
参数：A=12， B=40， C=12， D=15， T=1， F=52， G=52

免费下载：
UG11.0教程106参数化建模 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Thu, 18 Jan 2018 01:38:22 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程105参数化建模3D05_L02B中磊教育</title>
      <link>https://9sug.com/thread-36631-1-1.html</link>
      <description><![CDATA[UG11.0教程105参数化建模3D05_L02B中磊教育

题目简介：
题目：参照图构建模型，注意其中的同心、对称、等壁厚等几何关系。
参数： A=3， B=2， C=76， D=65， E=56， F=10， G=52

在线学习：

免费下载：
**** 本内容被作者隐藏 ****
 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Sun, 14 Jan 2018 00:01:12 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程104参数化建模3D05_L02A中磊教育</title>
      <link>https://9sug.com/thread-36630-1-1.html</link>
      <description><![CDATA[UG11.0教程104参数化建模3D05_L02A中磊教育

题目简介：
题目：参照图构建立体模型，请注意其中的相切、等壁厚、同心等几何关系。
参数： A=120， B=4， C=65， D=22， E=40， F=32， G=15

在线学习：

免费下载：
**** 本内容被作者隐藏 ****
 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Sat, 13 Jan 2018 23:57:13 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程103参数化建模3D05_H01_B中磊教育</title>
      <link>https://9sug.com/thread-36629-1-1.html</link>
      <description><![CDATA[UG11.0教程103参数化建模3D05_H01_B中磊教育

题目简介：
题目：参照图构建立体模型，注意其中的对称、同心等几何关系。
参数：A=36， B=22， C=15， D=80， E=59， F=27

在线学习：


免费下载：
**** 本内容被作者隐藏 ****

 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Sat, 13 Jan 2018 23:52:44 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程102参数化建模3D05_H01_A中磊教育</title>
      <link>https://9sug.com/thread-36628-1-1.html</link>
      <description><![CDATA[UG11.0教程102参数化建模3D05_H01_A中磊教育

题目简介：
题目：参照图构建零件模型，注意其中的对称、相切、等距（偏距）等几何关系。
参数： A=126， B=19， C=87， D=5， E=91， F=106， T=3.8

在线学习：

免费下载：
**** 本内容被作者隐藏 ****
 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Sat, 13 Jan 2018 23:46:31 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0教程101参数化建模3D05_L01B中磊教育</title>
      <link>https://9sug.com/thread-36627-1-1.html</link>
      <description><![CDATA[UG11教程100讲参数化建模3D05_L01B中磊教育

题目简介：
题目：参照图构建三维模型，注意其中的对称、同心等几何关系.
参数： A A =50， B=40， C=25， D=2， E=2

在线学习：


教程下载：
**** 本内容被作者隐藏 ****
 ...]]></description>
      <category>UG11.0教程</category>
      <author>ug9.0</author>
      <pubDate>Sat, 13 Jan 2018 13:26:31 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0建模实体默认画的实体有很多线就上UG网</title>
      <link>https://9sug.com/thread-36465-1-1.html</link>
      <description><![CDATA[UG11.0建模实体默认画的实体有很多线就上UG网]]></description>
      <category>UG11.0教程</category>
      <author>9898</author>
      <pubDate>Sun, 24 Dec 2017 23:08:02 +0000</pubDate>
    </item>
    <item>
      <title>UG11.0怎么移动定义点就上UG网</title>
      <link>https://9sug.com/thread-36451-1-1.html</link>
      <description><![CDATA[UG11.0怎么移动定义点就上UG网

在UG软件中，我知道如何对实体、片体、曲线进行移动操作，还没有移动过点呢]]></description>
      <category>UG11.0教程</category>
      <author>ug7</author>
      <pubDate>Sun, 24 Dec 2017 00:12:17 +0000</pubDate>
    </item>
  </channel>
</rss>